On the Bathroom tab you will find bathroom equipment that will help you set up complete bathrooms for home or office environments.
The tab is divided into six sections: Sanitary Ware, Bath Tubs, Shower Cabins, Wash Basins, Wall Cabinets and Washing Appliances.
The majority of the components on the tab can be stretched or shrunk. Some components also have Settings dialogs where you can make other changes. To open the settings dialog box, you can either double-click on the component, or right-click and choose Settings from the pop-up menu.
For Sanitary Ware there are only three different ready modules, none of which has a Settings dialog.
The two different Bath Tubs cannot be changed in the drawing area, whereas the Faucet has a Settings dialog where the Distance to floor can be specified. By this, you determine how high up from the ground the faucet should be placed.
For Shower Cabins there are only three different ready modules, none of which has a Settings dialog.
For Wash Basins there are only three different ready modules, none of which has a Settings dialog.
All three Wall Cabinets share the same Settings dialogs. In the Height text box, you specify the height of the cabinet and in the Distance to floor text box, you specify how high the cabinet will be placed. If you want to lock the distance that you have entered, check the Lock vertical position box.
Three of the components under the heading Washing Appliances have Settings dialogs. These are the washing machine, the tumble drier and the drying cabinet. The dialog is the same for all three components. In this dialog, in the Height text box, you can specify the height of the component.
All the settings dialogs have the drop-down list Apply to. In this list, you choose the components you want to change. Using the OK or Apply buttons, you can confirm the changes you have made.