In the Print Frame Settings dialog you make different settings for the selected print frame.
Figure 1
You have the following options:
Printer: Select the desired printer by selecting one of the options in the drop-down menu.
Paper: Select desired paper size by selecting one of the options in the drop-down menu.
Orientation: Use these two buttons to change between portrait and landscape orientation. In the upper right corner of the actual print frame, there is also a button for quick toggling between portrait and landscape orientation, so you won't have to open the Settings dialog each time you want to change this.
Settings: Click the Settings button if you wish to make further settings for the printer.
Scale: Select the desired drawing scale in the Scale field by clicking one of the pre-defined options, or by clicking the ellipsis and then enter a value in the input field to the right.
Step: By selecting one of the Step options, you can specify the sensitivity of the steps when stretching or shrinking the print frame, i.e. how much the scale of the print frame increase or decrease for each step. The lower value, the smaller steps. Select one of the pre-defined options, or click the ellipsis and then enter a value in the input field to the right.
Print: Click the Print button to do the print settings and finally print the desired drawing layout and lists.
Apply to: Select one of the options in the Apply to drop-down menu.
Note:
|