In order to create a drive-in system using a product series in InstantPlanner, proceed as follows:
Select the desired product series from the drop-down list at the top of the component tab.
Select the Design Specifications button to open the dialog box. The Product Series tab is pre-selected. In the General Options field, select Drive-in as system type.
Proceed with your settings on the tab.
Select the Advanced tab and do the desired settings.
Confirm your settings and close the dialog by selecting OK.
Do the rest of the settings on the Drive-In/Push-Back tab.
Design your system by placing the Rack component directly in the drawing area. You can stretch it in width whilst positioning it. The system can also be stretched in depth after placement in the drawing area. An elevation view is added automatically.