The Shelving Accessories tab is divided into three main sections: Type, Color, Elevations and Shelving Unit.
In the Type choice you have the possibility to specify accessories for which you would like to set different prices or discounts.
Example:
Select A as the first type and then place a Drawer on the drawing area. Then select B as the second type and place a similar component in the drawing area. In the Calculation, you will then have the two similar drawers specified as different types. Now you can set, among others, different prices or discounts for these.
Here, you can choose among a variety of colors and apply the new color to the accessories on this tab.
Under the Elevation heading you will find several useful accessories that are snapped to the elevation view(-s) on the drawing layout.
The following are included:
Shelf Divider
Book Support
Drawer
Kick Plinth
Double Door
Clicking the button Single allows you to insert one shelf divider at a time on a shelf.
Clicking the button Select allows you to enter the desired number of shelf dividers per shelf and then automatically insert these in one step.
Clicking the button Select (Section) allows you to enter the desired number shelf dividers per shelf and then automatically insert these on all shelves in a shelving system.
Under the Shelving Unit heading you will find the accessories Back panel, Front panel, Label and Cross Brace, all of which you snap to the shelving unit(-s) in the 2D drawing layout.
Activating the function Auto Fill Side/Back (by setting it to Yes) will automatically insert back panels, front panels, labels and cross braces on the whole side/back of a shelving system.
For the cross brace, it is possible to pre-set the number of items required in the drop-down list to the right and then snap the accessory to the shelving unit.