When you develop an image automatically or manually, you first create an image preview. There are two menus in the image preview menu bar: Image and Control.
When you have developed an image, you can choose one of the following items from the Image menu: Copy, Paste, Save or Print.
When you Copy an image, you can, for example, paste it into a Word document.
To do this, follow the instructions below:
Choose Copy.
Open the document in which you want to paste the image and press Ctrl+V.
Using Paste you can paste an image onto the current drawing area.
To do this, follow the instructions below:
Choose Paste. The Windows Save As dialog opens.
Go to the folder on the hard disk where you want to save the image. Enter a name for the image and click on Save.
Go back to the drawing area, and you will see that the image which you developed is now pasted onto the drawing area.
If you want to Save the image you have developed, follow these instructions:
Choose Save, and the Windows Save As dialog box opens.
Go to the folder on the hard disk where you want to save the image. Enter a name for the image and click on Save.
You can also print the image, by following these instructions:
Choose Print. The Print Setup dialog opens.
Choose the settings you want in the dialog.
Click on OK.
On the Control menu, there are two options: Cancel and Redraw. Using Cancel, you can cancel the current image development. Using Redraw, you can delete the remains of lines which very occasionally are left in the developed image, for example if you have dragged a dialog over the image.