On the Storage tab you can pre-set the cabinet dimensions, its appearance and material. In order read about how to position and change a cabinet in the drawing area, click here.
Under the Frame heading, you pre-set the dimensions and material for the cabinets by choosing from the list boxes to the right of the headings Material, Height, Width and Depth. When clicking on an arrow, a range of alternatives will be shown.
In the list box for Material, you can choose between the categories Wood, Metal, Plastic and Plain. After choosing the category, select the desired material.
For the other choices, Height, Width and Depth, you can choose between several given values and the alternative Custom which opens a new text field where the desired value can be entered. The components can be between 500 and 3,000 mm high and between 500 and 3,000 mm wide. In depth, the components can be between 300 and 800 mm.
The cabinets can be provided with different types of front panels. You determine the desired type of panel by choosing from the list boxes Type, Opening and Height. In the list box for Type, you can choose between the alternatives Standard 
, Vitrine 
and Roller shutter 
.
If Standard or Vitrine is selected in the list box for Type it is possible to choose Single or Double in the list box for Opening. This means one or two doors for the storage component.
You can set the height of the door by choosing Full cover, Half cover, Free or Custom in the list box for Height. If you chose Free, the height of the door can be decided by dragging the doors snap points in the desired direction. This is done after the door has been placed in the frame (the side view). If you select Custom, a text box will be displayed to the right of the list box. In the text box you enter the preferred size. The door can be between 500 and 3,000 mm high.
|
Note:
|
The frame (i.e. the elevation view) can be filled with shelves and drawers. You can decide the positioning of the accessories from the list box Spacing. In the list box you can select Free which makes the positioning of the accessories completely free. You can also select Custom which makes a text box appear to the right of the list box. In this text box you enter a value that determines the vertical distance between the accessories. Enter for instance the distance 200 mm. The vertical distance (spacing) between the shelves or drawers will automatically be 200 mm when the chosen accessories are positioned in the frame (side view).
Do as described below to set the distance:
Choose Custom or Free in the list box Spacing.
If you are choosing Custom, enter a distance in the text field that appears to the right of the list box.
Select the accessory you want and move it towards the frame (the side view) the accessory will snap in the frame.
Position the accessory in the frame (the side view) by clicking it into position. Another accessory becomes visible above or below the positioned one.
If you want more shelves or drawers, keep clicking them into the frame (side view).